Filling station information
Item
Recommended fuel
Fuel tank capacity
Engine oil capacity
(includes filter change)
Tire size and pressure
Hood release
Coolant capacity*
Power steering fluid capacity
Manual transaxle fluid capacity
Automatic transaxle fluid
capacity**
* If your engine requires additional coolant, use Ford Premium Cooling
System Fluid. Refer to Lubricant Specifications.
** Ensure correct automatic transaxle fluid is used for a specific
application. Check the container to verify the fluid is MERCON and/or
MERCON V approved. Some fluids have been approved as meeting both
MERCON and MERCON V requirements and will be labeled as such.
Fluids labeled as meeting only MERCON or only MERCON V
requirements must not be used interchangeably. DO NOT mix MERCON
and MERCON V. Transaxle fluid requirements are indicated on the
dipstick or on the dipstick handle. Refer to your Scheduled Maintenance
Guide" to determine the correct service interval.
336
Information
Unleaded fuel only - 87 octane
50 L (13.2 gallons)
2.0 L Zetec E: 4.25 L (4.5 quarts)
2.0 L SPI: 3.78 L (4.0 quarts)
See label on the inside of the fuel
filler door or the safety compliance
label.
Pull handle under the left side of
the instrument panel
5.75 L (6.1 quarts)
Fill to line on reservoir.
2.0 L (2.1 quarts)
6.6 L (6.9 quarts)