Motion Settings - HIKVISION DS-2DF5284-A User Manual

5 Inch Network High-definition Speed Dome User Manual
When the Wide Dynamic Range (WDR) function is on, the dome is able to balance the brightest and darkest sections of a scene to
produce a picture that is better balanced in lighting and provides more details.
Note: The BLC/WDR feature varies depending on camera model. The default setting is for BLC function.

EXPOSURE MODE
The exposure mode can be set to IRIS PRIORITY, SHUTTER PRIORITY, GAIN/MANUAL or AUTO. When it is set to AUTO, the
auto iris, auto shutter and auto gain functions are all enabled; when it is set to IRIS PRIORITY, the iris function adopts the defined
value while the auto shutter and auto gain remain to be enabled; when it is set to SHUTTER PRIORITY, the shutter function adopts
the defined value while the auto iris and auto gain remain to be enabled; and when it is set to GAIN/MANUAL, the gain value can be
adjusted, or the iris, gain and shutter values are all adjustable. The default setting is AUTO.
The Gain/Manual feature varies depending on camera models.
Note:

IRIS
The iris is the lens function that opens and closes the iris in response to changing light conditions, with the numeric values from 0 to 17
selectable.

SHUTTER
The Shutter is the duration of the electronic shutter. User can set the shutter speed to 1, 2, 4, 8, 15, 30, 60, 125, 180, 250, 500, 1000,
2000, 4000 or 10000. The numeric value of X indicates the shutter speed is 1/X second.

GAIN
The Gain indicates the amplification degree of the original image signal, with the numeric values from 0 to 15 selectable.

EXP COMP/NOISE REDUCE
The exposure compensation effect can be adjusted through exposure volume adjustment. The numeric values from 0 to 14 are
selectable, with the default setting of 7.
The noise reduce function can be set to OFF, HIGH, MID and LOW. The default setting is MID.
This feature varies depending on camera models.
Note:

IMAGE FLIP
This feature allows the video image to be mirrored horizontally and vertically on the screen.

WHITE BALANCE
This feature automatically processes the viewed image to retain color balance over a color temperature range. The dome provides 5
modes for selection: AUTO, INDOOR, OUTDOOR, SELFDEFINE and ATW. When the SELFDEFINE is selected, set the value of
RED and BLUE.

FOCUS NEAR LIMIT
The focus near limit can be set to 1CM, 30CM, 1M or 3M. The feature allows the camera to perform auto focus out of the focus near
limit.

INITIALIZE LENS
This feature enables the camera to perform daily lens initiation action at 00:00:00 to ensure the normal operation.

3.3.3 MOTION SETTINGS

The MOTION menu is displayed in two pages, as shown in Figure 3.3.11 and Figure 3.3.12.
16