Table of Contents
Advertisement
5 Inch Network High-definition Speed Dome User Manual
Chapter 2 Operation Instructions
2.1 Power-up Action
After the power is applied, the speed dome will perform self-test action that begins with lens actions and then pan and tilt movement.
After completion of power-up self-test actions, the interface as shown in Figure 2.1 will be displayed on screen for 40 seconds.
The System Information displayed on the screen includes the Dome Address, Protocol, Version and other information. The
COMMUNICATION refers to the baud rate, parity,data bit and stop bit of the dome, e.g., "2400, N,8, 1" indicates the dome is
configured with the baud rate of 2400, no parity,8 data bits and 1 stop bit. Please refer to Section 3.3.1 for detailed information.
2.2 Presets with Special Functions
The following presets are predefined with special functions:
Call Preset
33
Auto flip
34
Pan zero
35
Patrol 1
36
Patrol 2
37
Patrol 3
38
Patrol 4
39
IR cut filter in
40
IR cut filter out
41
Pattern1
42
Pattern2
43
Pattern3
44
Pattern4
92
Enable limit stops setting
MODEL
DS-2DF1-571
ADDRESS
COMMUNICATION
2400,N,8,1
SOFTWARE VERSION
2. 0.1
LANGUAGE
ENGLISH
Figure 2.1
Function
Call Preset
0
Function
93
Set manual limit stops
94
Remote reboot
95
Access main menu
96
Stop a scan
97
Start random scanning
98
Start frame scanning
99
Start pan scanning
9
Hide quick links:
Advertisement
Table of Contents
