Mounting Monitor Base; Adjusting The Inclination - Fujitsu P22W-5 ECO Operating Manual

Mounting monitor base

► Guide the lug on the front of the foot into the base plate (1).
► Firmly press the base plate on at the rear (2).
► Secure the base plate with the screw (3).
The height of the monitor can be adjusted by approximately 120 mm.
► Grasp the monitor with both hands on the right and left edge of the casing and move it up or down.

Adjusting the inclination

The inclination of the monitor can be adjusted by - 5° (forward) and +25°
(back) from its vertical position.
► Hold the monitor with both hands on the left and right sides of the casing
and move it to the desired angle.
A26361-K1253-Z220-1-7619, edition 2
Downloaded from ManualMonitor.com Manuals
Getting started
11