Table of Contents
Advertisement
Getting started
Mounting the monitor base
Be careful not to scratch the surface of the screen!
Place the device on a stable, flat and clean surface. If necessary, place an anti-slip
cloth on this surface to prevent the device from being scratched.
1
► Insert the base plate on the foot (1).
► Secure the base plate with the screw (2).
► Lay the monitor on its front on a soft surface.
► Insert the monitor stand into the bracket in the direction of the arrow (3).
14
2
3
Fujitsu
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the P2410 Series and is the answer not in the manual?
Questions and answers
I have a Fujitsu P2410 TS and the webcam doesn’t work. Is this likely to be fault or is there an instruction on how to activate it
To activate the webcam on a Fujitsu P2410 TS, open an application that supports webcam functionality, such as an internet telephony or video conferencing program. The webcam has a status indicator that lights up when it is in use.
If the webcam does not work:
1. Ensure the sliding shutter is open.
2. Check if the webcam is enabled in the system settings.
3. Verify that the correct drivers are installed.
4. Ensure the application you are using supports webcams.
5. Adjust the lighting conditions, as the webcam automatically adapts to light levels.
6. Restart the system and try again.
For additional settings, refer to the help function of the program using the webcam.
This answer is automatically generated