Doing a Daily Check
Look through the small hole in the test
strip holder to make sure there is no lint,
dirt, or blood blocking it.
If there is anything blocking the hole, or
if the test area has dirt, lint, or blood
on it, remove the test strip holder and
clean the test area by following the
instructions in the next section. Then
do a check strip test (see page 14).
Cleaning the Meter
Clean the meter and test strip holder:
At least once each week
■
■
Whenever the test area looks dirty
■
Whenever
appears on the display
73
clean
test
area
Need help?
Do you have a question about the OneTouch Basic Basic Blood Glucose Monitoring System and is the answer not in the manual?
Questions and answers