BEFORE TESTING
Note: You do not have to enter the
set-up mode to test. However, the
®
OneTouch
Basic
number of settings you can change,
including the language, time and
date, display formats, and the unit
of measure. For a description of
these options and how to set them,
see page 47.
Setting Meter Code
Code numbers are used to enable your
meter to provide consistent
measurements. For this reason, it
is important that the code is set
®
Meter has a
correctly. You must code the meter
before using it for the first time
and then every time you change
to another vial of OneTouch
®
Profile
, OneTouch
CAUTION: If the code number on
the meter display does not match
the code number on the vial of
®
OneTouch
Basic
®
OneTouch
II Test Strips, test results
may be false.
Code the OneTouch
these three easy steps:
11
®
Basic
®
II Test Strips.
®
®
, Profile
,
®
®
Basic
Meter in
®
,