Lifescan OneTouch Basic Basic Blood Glucose Monitoring System Owner's Booklet page 45

Step 3: Accurate Results in
45 Seconds.
The meter then
counts down from
45 to 0 seconds,
beeps (if the Beep
option is set to
), and displays
your result. Remove
the test strip only
after the result is displayed.
Blood glucose test results are automati-
cally stored in your meter's memory
with the time and date they were
performed. If you have chosen to turn
the Clock option to
results will appear without time and
date. (See page 49).
M C
(Example)
, your test
Note: The meter records the time
and date of each test even when the
Clock option is set to
once again be seen by turning the
Clock option to
Note: The first time you enter
the set-up mode, the meter will
automatically display the time as
Pacific standard time (PST) when the
Clock option is set to
not reset the time, the meter will
accurately record each test result
using PST.
37
. They can
.
. If you do