Lifescan OneTouch Basic Basic Blood Glucose Monitoring System Owner's Booklet page 44

M C
and stays wet during the entire test.
■ Do not smear blood on the test spot
or apply a second drop after the test
begins.
Be sure that you:
■ Touch only the tip
of the drop of
blood to the test
spot.
■ Apply enough
blood to form a
round, shiny drop
that covers the test
spot completely
Do not move the test strip as you are
■
applying blood. If the test strip
moves, push it back into its original
position.
Do not remove the test strip from the
■
meter to apply blood.
Do not touch or move the test strip
■
once the count has begun.
If the Beep option is set to
meter will beep when the blood is
applied to the test spot. See page 39,
"Checking the Amount of Blood on the
Test Strip."
36
, the