Before Testing; Checking The Meter Display; Coding The Meter - Lifescan OneTouch Ultra Owner's Booklet

Blood glucose monitoring system

Hide thumbs Also See for OneTouch Ultra:

Table of Contents

Before Testing

Each time you turn on the OneTouch

Meter either by inserting a test strip or

pressing the M button, all segments of the

display will appear briefly. This tells you that

the system is performing several self-checks to

confirm that the meter is working properly. To

check that all display segments are working,

hold the C button down.

Code numbers are used to calibrate the OneTouch

OneTouch

Ultra

before using it for the first time and then every time you change to another

vial of test strips. Each time you test, check to be sure that the code

number on the meter display matches the code number on the

test strip vial.

CAUTION:

test results.

Test Strips for accurate results. You must code the meter

Failure to code the meter correctly will cause inaccurate

Ultra

Meter with

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the OneTouch Ultra and is the answer not in the manual?