ECOTEST MKS-05 TERRA-P+ Operating Manual page 33

6.3 Operation procedure of the dosimeter
6.3.1 Switching the dosimeter on/off
Press shortly the MODE button to switch the dosimeter on. The information
displayed on the LCD, blinking of the light-emitting diode below the LCD and audio
signaling of the registered gamma quanta show that the dosimeter is on.
Press the MODE button once again and hold it pressed for six seconds to switch
the dosimeter off.
6.3.2 Measurement of gamma radiation DER
The mode of gamma radiation DER measurement is entered automatically after
the dosimeter is switched on. The mode is indicated by the blinking light-emitting
diode opposite the appropriate mnemonic symbol below the LCD. The results of
measurement will appear on the LCD during the first few seconds, enabling efficient
evaluation of radiation level.
33