Digisol DG-HR1020S User Manual page 9

DG-HR1020S User Manual
Connect via Wi-Fi
Note: The following example uses Windows 7's built-in wireless connection
utility. If you are using a different operating system, or a third party connection
utility, the process may be different. Please refer to the documentation that
came with your operating system or wireless client for further information on
how to connect to a wireless network.
To connect to the router using Wi-Fi, open your operating system's wireless
networking utility and scan for available networks to connect to. By default, the
network name (SSID) of DG-HR1020S will be in the format "DIGISOL",the default
password is 12345678.
Once you have located this network with your wireless utility, connect to the network
using your wireless networking utility.
You will then be prompted to enter the network security key for your router. The
unique security key for your router will be displayed on the router. Enter the security
key in the box provided and click OK. Your wireless connection utility should
confirm that the connection is successful, and you can move to the next step to
continue to configuration process.
9