IMPORTANT INFORMATION
Use only VESA®-approved mounting hardware.
l
Disconnect all power cables for your interactive flat panel from the wall outlet and seek
l
assistance from qualified service personnel when any of the following occurs:
The power cable or plug is damaged
o
Liquid is spilled into the interactive flat panel
o
Objects fall into the interactive flat panel
o
The interactive flat panel is dropped
o
Structural damage such as cracking occurs
o
The interactive flat panel behaves unexpectedly when you follow operating
o
instructions
CAUTION
Before you clean your SMART product, shut down or disconnect the computer. Otherwise,
l
you may scramble the desktop icons or inadvertently activate applications when you wipe
the screen.
Avoid setting up and using the SMART product in an area with excessive levels of dust,
l
humidity and smoke.
Make sure an electrical socket is near your SMART product and remains easily accessible
l
during use.
The external power supply needs to meet the Limited Power Source (LPS) requirements of
l
CSA/UL/IEC/EN 60950-1, when required.
This SMART product should be used only with European TN and TT power distribution
l
systems.
It is not suitable for older, IT-type power distribution systems found in some European
countries. "This system (IT-type) is widely used isolated from earth, in some installations in
France, with impedance to earth, at 230/400V, and in Norway, with voltage limiter, neutral
not distributed, at 230V line-to-line." (IEC 60950:1999)
Contact qualified personnel if you're uncertain of the type of power system available where
you're installing your SMART product.
You must connect the USB cable that came with your interactive flat panel to a computer
l
that has a USB compliant interface and that bears the USB logo. In addition, the USB source
computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and CSA and/or
UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid damage to the
interactive flat panel.
ii
smarttech.com/kb/170642
Need help?
Do you have a question about the Board 6065 and is the answer not in the manual?