TIPTEL 3240 User Manual page 58

Intercom
HotLine
ACD
Remote Control
Keypad Lock
Key As Send
Others
administrator for special extension on your system.
Intercom allows user to establish a call directly with the
callee.
Active: To enable or disable Intercom feature.
Intercom Mute: If enabled, once the call established, the

callee will be muted.

HotLine allows user to call out a defined number
automatically after hearing the dailtone without dialing any
number.
Active: To enable or disable HotLine feature.
Number: To set a defined HotLine number.

Delay Time: To set the automatically call out interval

after hearing the dailtone.

ACD (Automatic Call Distribution) is most used in call-center
market, it allows IP phone to login the system with multiple
status so that the system could distribute an incoming calls to
available user or agents.
ACD Activated Auto: If enabled, Agent status will turn to
available automatically within a designated time(decided

by ACD Activated Auto Timer).
ACD Activated Auto Timer: To configure interval when
will Agent status becomes available automatically.

ACD Pwd Required: To enable the ACD password.
Remote Control allows specific host to interact with IP phone

by sending HTTP or HTTPS requests. The specific action could
be answering an incoming call, hangup an ongoing call and so
on.
Allowed Access IP List: To configure the allowed host
address.

Note: For now, IP phone can only support IP address, IP
address list and IP address pattern as allowed hosts
Keypad Lock allows to lock the keypad of your phone
temporarily when you are not using it. This feature helps to
protect your phone from unauthorized use.
Keypad Lock Type: To lock the phone with function keys
or all keys;

Keypad Unlock PIN: To lock the phone with a password.
Keypad Lock Timeout: the idle interval to lock the phone.

Key As Send allows you to disable send key or assign pound

key as send key.
Return Code When Refuse: Allows user to assign specific
code as return code to SIP server when an incoming call

is rejected.
Auto Answer Delay: To configure delay time before an
