LXE VX6 Read Me First page 2

How To Set Up the Radio
The Summit Radio icon is either on the Desktop or
under Start | Programs | Summit.
The Cisco Radio icon is either on the Desktop or
under Start | Programs | Cisco.
Tap the icon with the stylus.
Note: If the access point uses authentication protocol
(WEP, LEAP, etc.) your radio must use the
same authentication keys. Please contact your
IS department for WEP and LEAP encryption
keys before contacting LXE.
For information on configuring the mobile device for
WPA, please refer to the "VX6 Reference Guide" or
the "VX7 Reference Guide".
Summit
Access: Start | Programs | Summit | SCU -- OR tap
the Summit Client Utility icon on the desktop
1. Click on the Admin Login button and enter the
password (default = SUMMIT).
2. Click on the Config tab and make sure the
Default profile is selected.
3. Select SSID and enter your SSID value.
4. If the access point is using WEP, select Manual
WEP from the Encryption pull down list.
5. Click the WEP/PSK Keys button and enter the
WEP Key(s) and click OK. Skip to step 11.
6. If the access point is using LEAP, select LEAP
from the EAP Type pull down list.
7. Select Auto WEP from the Encryption pull down
list.
8. If the Cisco/CCX certified AP is configured for
open authentication, set the Auth Type radio
parameter is set to Open.
9. If the AP is configured for network EAP only, set
the Auth Type radio parameter is set to LEAP.
10. Click the Credentials button and enter the User
Name and Password.
VX67Startup
11. Click the Commit button to save the radio
configuration.
12. Click the Admin Logout button when finished
13. If you are finished configuring the device, warmboot.
Otherwise, make any other necessary changes and
then warmboot.
Please contact your IS department for WEP and LEAP
encryption information.
Cisco
Access: Start | Programs | Cisco | Aironet Client Utility
(ACU) -- OR tap the ACU icon on the desktop
1. Click on the Profile menu and select Edit.
2. Select SSID and enter your device's SSID value.
3. If the access point is using WEP, select WEP and
click the Static WEP Key box.
4. Enter the WEP Encryption Code and click OK.
5. If the access point is using LEAP, select Network
Security Type, and then LEAP.
6. Enter the User Name and Password when
prompted.
7. If you are finished configuring the device, warmboot.
Otherwise, make any other necessary changes and
then warmboot.
Please contact your IS department for WEP and LEAP
encryption information.
How to Initialize ActiveSync
Install ActiveSync on Desktop/Laptop
Go to the Microsoft Windows website ActiveSync
Download | Install file location:
www.microsoft.com/downloads
and type ActiveSync in the Keywords text box. This
process should locate the latest version of ActiveSync.
Install ActiveSync 3.7 (or later) on the desktop or laptop
computer before using ActiveSync to connect the desktop
computer to the VX6 or VX7.
Follow the instructions in the ActiveSync Wizard.
Because ActiveSync is already installed on your VX6
or VX7, your first synchronization process begins
automatically when you finish setting up your desktop
computer in the ActiveSync wizard and connecting to
the VX6 or VX7.
Set up VX6 or VX7 to ActiveSync using USB-
Client Connection
The mobile device is configured to use USB-C by
default. No configuration is necessary
Connect the USB-C cable to the PC (the host) and to
the VX6 or VX7 (the client). The ActiveSync
connection is established automatically when the
cable is connected.
Set up VX6 or VX7 to ActiveSync using Serial
Connection
Select Start | Settings | Control Panel | PC
Connection. Click the Change button. From the
popup list, choose Serial 3 @ 57600
This will set up the mobile device to use COM 3.
Connect the modem (serial) cable to the PC (the host)
and to the VX6 or VX7 (the client).
Select "Connect" from the Start Menu on the mobile
device (or Start | Programs | Communications |
Connect).
Please refer to the "VX6 Reference Guide" or the
"VX7 Reference Guide" on the LXE Manuals CD for
more ActiveSync connection choices.
Notice
Please refer to the equipment guides on the LXE
Manuals CD for user instructions, cautions, warnings,
and regulatory notices.
Revision B, August 2006