Cleaning And Maintenance - Russell Hobbs RHCM50 Instructions And Warranty

3. Place the jug on its power base. Place the lid securely on to the jug.
4. Choose the mode you want to make with the milk:
To make Cold, Frothed Milk:
Make sure you have inserted the whisk (whisk with wire spring) and ensure that the jug is filled with
milk up to the lower MAX level (150ml) or at least filled to MIN mark. Check that the lid is securely
in place. Afterward, press and hold the ON/OFF button for three (3) seconds until the blue light
turns on to start frothing. Once the frothing process is completed, the blue light will turn off
automatically. Now the frothed milk is ready.
To make hot, Frothed Milk:
Make sure you have inserted the whisk (whisk with wire spring) and ensure that the jug is filled with
milk up to the lower MAX level (150ml) or at least filled to MIN mark. Now check that the lid is
securely in place. Afterward, press the ON/OFF button briefly, the red light turns on to start
frothing. Once the frothing process is completed, the red light will turn off automatically. Now the
hot and frothed milk is ready.
To make Hot Milk:
In this mode, the whisk is not necessary, so make sure that the whisk is removed and that the jug
is filled with milk up to the upper MAX level (300ml Max) or at least filled to MIN mark. Check that
the lid is securely in place. Afterward, press the ON/OFF button briefly, the red light turns on to
start heating milk, once the heating process is completed, the red light will turn off automatically.
Now the hot milk is ready.
NOTE: CLEAN THE MILK FROTHER THOROUGHLY AFTER EACH USE.

CLEANING AND MAINTENANCE

CLEANING THE MILK FROTHER
This appliance requires little maintenance. It contains no user serviceable parts. Do not try to fix it
by yourself.
27