Trouble Shooting - Russell Hobbs RHCM50 Instructions And Warranty

TROUBLE SHOOTING

PROBLEM
CAPSULE COFFEE MAKER:
No coffee is brewed.
The coffee is not hot
enough.
The capsule can't or hasn't
dropped down into the used
capsule container/ bin.
There is steam when the
operating handle is opened.
There is water on the table.
CAUSE
The water tank is empty.

Cold 'to the touch' cups/
mugs are being used.

Scale build-up in machine.

The used capsule container/
bin are full.

The capsule is deformed.
The handle may have been
opened too quickly once
brewing finished.

The water tank may be
leaking.

The drip tray is full of water.

Once brewing had finished,
one could have opened the
SOLUTION
Fill water into the water
reservoir.

Preheat the cup/ mug.

Descale.

Cold machine - brew a cup of
water to warm up the circuit.

Empty the used capsule
container/ bin.

Push the capsule down with
your finger or close the
handle and open it once
again.
Leave the appliance for a few
seconds to let the residual
pressure and existing pressure
to escape.

Check if the valve on the
water reservoir is stuck.

Empty the drip tray.

Make sure that the drip tray
set correctly in its in place.
23