Stabilizer Bar; Turn Hearing Aid On - MDHearingAid Pro User Manual

Step 5: Stabilizer Bar Adjustments
a) The Stabilizer Bar feature helps
keep the Tubing and Ear Dome
properly positioned in the ear.
b) Tuck Stabilizer Bar in the outer
bowl of the ear. It may be trimmed
to suit the size of your ear.
c) When the Ear Dome has been
inserted properly in the ear canal the
Tubing should be flush against the ear.
d) Give a gentle push on the Tubing to
make the Ear Dome snug. (The Tubing is
reinforced in this area for this purpose.)
12
Step 5
a)
Stabilizer
Bar
b)
c)
Step 6: Turn the
MDHearingAid
Above the Power & Program Switch
'O' indicates OFF. Flip the switch to the
'N' or 'H' Program to turn Hearing Aid ON.
'N' indicates Normal amplification of
high, mid, and low frequencies. Use
this Program if you have a "flat" loss
(a hearing loss in all frequencies).
'H' indicates High to mid frequency amplification
with less amplification in low frequencies. Use
this Program if you have a "sloping" hearing loss,
or if you desire less background noise.
Try both Programs at various volumes to see
which combination works best for you.
CAUTION! Please raise the volume SLOWLY until you can hear
d)
speech at a normal range and to avoid a sudden blast of sound.
Step 6
®
PRO On
Volume
Dial
Power &
Program Switch
13