Table of Contents
Advertisement
STEP 7:
Insert two 3/4" x 1" BUSHINGS (36) to the ends of the PAD HOLDER ASSEMBLY (4). Insert the 1/2" x 3 1/4" SHAFT
(35) through the 3/4" x 1" BUSHINGS (36).
Position the PAD HOLDER ASSEMBLY (4) onto the MAIN FRAME ASSEMBLY (1) as shown.
Secure the PAD HOLDER ASSEMBLY (4) to the ROLLER CARRIAGE ASSEMBLY (D) using two M10 x 20mm
SCREWS (22) and two FLAT 3/8" WASHERS (19). Tighten the screws securely.
12
Advertisement
Table of Contents
