Remote Controller - Takagi 110 Indoor (T-KJr2-IN) Installation Manual And Owner's Manual

CASE 3: Wrong connections between the "CHILD-1" unit and the "CHILD-2" unit
• If you connect the "PARENT" connector of the "CHILD-1" unit to the "1" connector of the
"CHILD-2" unit, the "CHILD-2" unit will operate as an individual unit, and will not be part of the
Easy-Link System.
Prohibited
Wrong connections between
the "CHILD-1" unit and the
"CHILD-2" unit
Connecting two "PARENT" connectors together from two separate units may
damage the computer board. The communication cable has a female end and
a male end so it's impossible to have a PARENT-to-PARENT connection with the
WARNING
communication cable. Do not splice or modify connectors.
CASE 4: Remote controller connected to incorrect unit
• If a remote controller is used, it has to be connected to the "PARENT" unit. If the remote
controller is connected to a "CHILD" unit, it will only control that particular individual "CHILD"
unit and will not control the Easy-Link System as a whole.

Remote controller

connected to
incorrect unit
Prohibited
PARENT CHILD-1
unit unit
Connectors Connectors
Right bank of Right bank of
Dipswitches Dipswitches
1 2 3 4 5 6 1 2 3 4 5 6
ON ON
OFF OFF
Communication
cable
PARENT CHILD-1
unit
Connectors Connectors
Right bank of Right bank of
Dipswitches Dipswitches
1 2 3 4 5 6 1 2 3 4 5 6
ON ON
OFF OFF
Communication
cable
27
Page
Installation Manual
Installation
CHILD-2
unit
Connectors
Right bank of
Dipswitches
1 2 3 4 5 6
ON
OFF
Wrong connection
unit
Wrong
connection