Ricoh Aficio MP C4502 User Manual page 206

10. Troubleshooting
Message
"Exceeded max. number of
files. (Auto)"
"Exceeded max. number of
pages of Document Server.
Cannot store."
"Exceeded max. number of
pages to print for
temporary / stored jobs."
"Exceeded max. pages.
Collate is incomplete."
"Exceeded max. number of
pages. (Auto)"
"Exceeded the maximum
unit count for Print Volume
Use. The job has been
cancelled."
"Failed to obtain file
system."
"File system is full."
204
Causes
While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum file
capacity for file storage or
Hold Print file management
(automatic) was exceeded.
The maximum page
capacity of the Document
Server was exceeded.
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.
The number of pages
exceeds the maximum
number of sheets that you
can use Collate with.
While using the error job
store function to store
Normal Print jobs as Hold
Print files, the maximum
page capacity was
exceeded.
The number of pages the
user is permitted to print has
been exceeded.
PDF direct printing could not
be performed because the
file system could not be
obtained.
PDF file does not print out
because the capacity of the
file system is full.
Solutions
Delete Hold Print files (automatic) or
unneeded files stored in the machine.
Delete some of the files stored in the
Document Server or reduce the number
of pages that you want to send.
Delete unneeded files stored in the
machine.
Reduce the number of pages to print.
Reduce the number of pages to print.
Delete unneeded files stored in the
machine.
Reduce the number of pages to print.
For details about print volume use
limitation, see Security Guide
Turn off the main power switch, and
then back on again. If the message
appears again, contact your service
representative.
Delete all unnecessary files from the
hard disk, or decrease the file size sent
to the machine.
.