Cleaning The Scale And Replacing The Filter - Epson SC-F2000 Series User Manual

SC-F2000 Series User's Guide
B
Remove the waste ink tube from the used waste
ink bottle, and insert it into the new waste ink
bottle taking care not to spill any waste ink.
C
Place the caps onto the used waste ink bottle.
D
Remove the used waste ink bottle from the waste
ink bottle holder, and then insert the new bottle.
Important:
c
Make sure that the waste ink tube is inserted
into the neck of the bottle. If the waste ink tube
comes out of the bottle, waste ink will spill out.
Maintenance
E
Press the Z button.
If you replace the bottle before the replacement
message is displayed on the control panel, press
the - button and reset the Waste Ink
Counter.
"Using the Control Panel Menu" on
U
page 69
F
Check once again that the new waste ink bottle is
installed correctly. Press the Z button to clear
the waste ink counter.
Cleaning the scale and replacing
the filter
When it is time to clean the carriage scale and replace the
air filter, a message is displayed on the control panel.
Clean the carriage scale and then replace the air filter.
Prepare a new air filter.
"Options and Consumable Products" on
U
page 87
A
Turn off the printer.
61