Cleaning The Print Head - Epson SC-F2000 Series User Manual

SC-F2000 Series User's Guide
E
Secure the paper with cellophane tape and so on
to keep it in place.
F
Check that the height adjustment lever is at the
"P" position on the label.
If it is not at the "P" position, move the height
adjustment lever.
"Adjusting the Height" on page 35
U
G
Press the } button.
Control Panel Operations
Buttons that are used in the following operations
Maintenance
A
Check that paper is loaded on the platen.
"Loading paper" on page 44
U
B
Press the - button.
The Maintenance menu is displayed.
C
Press the u/d buttons to highlight Nozzle
Check, and then press the r button.
D
Press the Z button.
E
Check that paper is loaded, and then press the
Z button again.
The check pattern is printed.
F
Check the check pattern.
Because the Cleaning liquid rows are difficult to
see in color ink mode, it does not need to be
checked.
Example of clean nozzles
There are no gaps in the check pattern.
Example of clogged nozzles
Perform head cleaning when there are gaps in the
check pattern.
"Cleaning the print head" on page 45
U

Cleaning the print head

If the printed result is faint or has gaps, cleaning the
print head may clear the clogged nozzles.
45