Using The Software; Contents Of The Software Disc - Epson SC-F2000 Series User Manual

SC-F2000 Series User's Guide

Using the Software

Contents of the Software Disc

The supplied Software Disc contains the following software. Install as required.
More information can be found in the Network Guide (pdf) and the software's online help.
Note:
❏ The printer driver is not stored on the supplied software disc. You need the printer's Garment Creator software or
software RIP to print. You can download software that is not contained on the supplied software disc (such as software
for this printer and plug-in software) from the Epson Web site.
❏ Download the latest software versions of application software from the Epson Web site.
Software Name
EPSON LFP Remote Panel 2
Epson Driver and Utilities
(Windows only)
Epson Network Utilities
EpsonNet Config
Introduction
Summary
EPSON LFP Remote Panel 2 is used to update the printer's firmware.
"Using EPSON LFP Remote Panel 2" on page 22
U
Installs the Epson communication driver (EPSON SC-F2000 Series Comm Driver).
The Epson communication driver is not the printer driver. If you connect the printer to a computer
using a USB cable without installing the Epson communication driver, the printer's status may not
be displayed in Garment Creator or software RIP. See the documentation supplied with the
software to confirm whether or not there is a status display function.
Installing this utility allows you to set the addresses necessary for the network connection easily
using a wizard.
With this software, you can configure various network settings for the printer from your computer.
This is useful as it allows you to enter addresses and names using the keyboard.
21