Installing The Fork Legs; Removing The Fork Protector - KTM 250 SX-F EU Owner's Manual

SERVICE WORK ON THE CHASSIS

Installing the fork legs

x
10.8

Removing the fork protector

10.9
–
Loosen screws
–
Unscrew screws
B00339-10
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
101276-10
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
B00339-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
–
Position the brake line and clamp. Mount and tighten screws
–
Install the front wheel.
B00300-11
x
–
Remove the fork legs.
–
Remove screws
–
Remove the screws on the right fork leg. Remove the fork protector from above.
B00306-10
. Take out the left fork leg.

. Take out the right fork leg.

toward the front.

.

M8
.

M8
M8
( p. 59)
x
( p. 32)
x
on the left fork leg. Remove the fork protector from above.

17 Nm
(12.5 lbf ft)
12 Nm (8.9 lbf ft)
.

Loctite ® 243™
25 Nm
(18.4 lbf ft)
.

33