Adding Engine Oil - KTM 250 SX-F EU Owner's Manual

SERVICE WORK ON THE ENGINE

Adding engine oil

16.3
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Remove filler plug
upper edge of the level viewer.
Engine oil
100947-10
Info
Too little engine oil or poor-quality engine oil results in premature wear to
the engine.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
–
Check the engine oil level. (
–
Remove the oil filler plug
–
Add the same engine oil that was used when the motor was changed.
Engine oil (SAE 10W/50) (
Alternative 1
Engine oil (SAE 10W/60) (00062010035) (
Info
For optimal performance of the engine oil, do not mix different types of
100948-10
engine oil.
If appropriate, change the engine oil.
–
Install and tighten the oil filler plug with O-ring.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
with the O-ring on the clutch cover and add engine oil to the

1.20 l (1.27 qt.) Engine oil (SAE 10W/50) (
Alternative engine
oil for harsh oper-
ating conditions
and increased per-
formance
p. 71)
with the O-ring from the clutch cover.

p. 90)
p. 90)
Engine oil
(SAE 10W/60)
(00062010035)
( p. 90)
p. 90)
73