Life Fitness Club Machine Assembly Instructions Manual page 4

FIGURE 1
STEP 1:
• LOOSELY assemble the two WEIGHT HORNS (9) and the BOTTOM CROSS BRACE (3) to the RIGHT and LEFT UPRIGHTS (1 &
16) as shown in FIGURE 1 using using four BLACK RH CAPS (18), four RH CAPS (19), four 3/8 X 3" BOLTS (12), eight 3/8"
SAE WASHERS (14), eight 3/8" RH WASHERS (15) and four 3/8" LOW HEIGHT LOCK NUTS (13) as shown in FIGURE 1.
• LOOSELY assemble the TOP CROSS BRACE (2) to the TOP SET of holes of the RIGHT and LEFT UPRIGHTS (1 & 16) as shown
in FIGURE 1 using using two RH CAPS (19), two 3/8 X 2-3/4" BOLTS (11), two 3/8" SAE WASHERS (14) and two 3/8" RH
WASHERS (15) as shown in FIGURE 1.
• LOOSELY assemble the BAR SUPPORT RACKS (8) to the outside of the RIGHT and LEFT UPRIGHTS (1 & 16) as shown in
FIGURE 1 using eight BLACK RH CAPS (18), eight RH CAPS (19), six 3/8 X 2-3/4" BOLTS (11), two 3/8 X 3" BOLTS (12),
sixteen 3/8" SAE WASHERS (14), sixteen 3/8" RH WASHERS (15) and eight 3/8" LOW HEIGHT LOCK NUTS (13) as shown in
FIGURE 1.
• SECURELY tighten all connections made to up to this point.
16
2
19
19
19
13
4
1
11 3/8 X 2-3/4"
8
12 3/8 X 3"
3
19
15
14
11 3/8 X 2-3/4"
18
19
18
9
12 3/8 X 3"
18