AC1900, N900, and N450 WiFi Cable Data Gateways
Figure 1. Front panel LEDs and buttons of the AC1900
You can use the LEDs to verify status and connections. The following table lists and
describes each LED and the WPS button on the front panel.
Table 1. Front panel LEDs and button of the AC1900
LED
Icon
WPS button
and LED
WPS button
WPS LED
Nonfunctional button and LEDs
Power LED
Downstream LED
Upstream LED
Internet LED
2.4 GHz WiFi LED
5 GHz WiFi LED
LAN LEDs (1–4)
Description
Press the WPS button to open a two-minute window for the cable data gateway to
connect with other WPS-enabled devices.
The WPS LED blinks green during this two-minute period. For more information
about using the WPS method to implement WiFi security, see the following sections:
•
Join the WiFi Network of the WiFi Cable Data Gateway
•
Use the WPS Wizard to Add a Device to the WiFi Network
Hardware Overview
9
on page 26
on page 52