NETGEAR C6300BD User Manual page 81

AC1900, N900, and N450 WiFi Cable Data Gateways
Field
Broadcast Name
Wireless isolation
Wi-Fi Protected Setup
Wireless Settings (5GHz)
The settings of the 5 GHz band of the main WiFi network. For information about how to configure the WiFi
settings, see View or Change the Basic Settings for the Main WiFi Network
Advanced WiFi Settings on page 109.
Name (SSID)
Region
Channel
Mode
Wireless AP
Broadcast Name
Wireless isolation
Wi-Fi Protected Setup
Guest Network (2.4GHz)
The settings of the 2.4 GHz band of the guest WiFi network. For information about how to configure the
WiFi settings, see Enable and Configure the Guest WiFi Network
Name (SSID)
Wireless AP
Broadcast Name
Description
Displays whether the 2.4 GHz band of the main WiFi network broadcasts its
SSID.
Displays whether WiFi isolation is enabled for the 2.4 GHz band of the main
WiFi network.
By default, the Wi-Fi Protected Setup (WPS) function is configured.
The network name of the 5 GHz band of the main WiFi network.
The location (country). By default, the region is the United States.
The channel that the 5 GHz band of the main WiFi network uses.
The WiFi mode that the 5 GHz band of the main WiFi network uses.
For model N900, the mode is Up to 450 Mbps by default. For model AC1900,
the mode is Up to 600 Mbps by default. Model N450 does not support the
5 GHz band.
Note: The selected mode also applies to the 5 GHz band of the guest WiFi
network.
Displays whether the 5 GHz band of the main WiFi network is enabled. If the
5 GHz band is disabled, the 5GHz WiFi LED on the front panel of the cable data
gateway is off.
Displays whether the 5 GHz band of the main WiFi network broadcasts its
SSID.
Displays whether WiFi isolation is enabled for the 5 GHz band of the main WiFi
network.
By default, the Wi-Fi Protected Setup (WPS) function is configured.
The network name of the 2.4 GHz band of the guest WiFi network. By default,
the name is NETGEAR_GUEST_0.
Displays whether the 2.4 GHz band of the guest WiFi network is enabled.
Note: The 2.4 GHz band for the main WiFi network can override the 2.4 GHz
band for the guest WiFi network. That is, if you disable the 2.4 GHz band for the
main network, the entire 2.4 GHz radio is disabled, which also disables the
2.4 GHz band for the guest network.
Displays whether the 2.4 GHz band of the guest WiFi network broadcasts its
SSID.
Manage and Monitor Your Network
81
on page 31 and Manage
on page 36.