•
Access Method. By default USB access to the network, HTTP, and FTP are enabled.
(File Transfer Protocol [FTP] lets you send and receive large files fast.) You can
disable access by clearing the Enable check boxes to the left of the Network
Neighborhood, HTTP, and FTP entries in the table.
7.
If you changed the settings, click the Apply button.
Your changes are saved.
View Network Folders on a USB Drive
You can view the network folders on the USB storage device.
To view network folders:
1.
On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2.
In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3.
Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4.
Click the OK button.
The BASIC Home screen displays.
5.
Select ReadyShare.
The USB Storage (Basic Settings) screen displays.
AC1900, N900, and N450 WiFi Cable Data Gateways
Share USB Drives Attached to the Cable Data Gateway
102