NETGEAR C6300BD User Manual page 17

AC1900, N900, and N450 WiFi Cable Data Gateways
Figure 7. Front panel buttons and LEDs of the N450
You can use the LEDs to verify status and connections. The following table lists and
describes each LED and button on the front panel.
Table 3. LEDs and front panel buttons of the N450
LED Icon
WiFi LED
WPS button
and LED
WPS LED
WiFi9 LED
Power LED
Downstream LED
Upstream LED
Internet LED
LAN LEDs
Description
• Solid green. The WiFi radio is functioning and available for use.
• Blinking green. The WiFi radio is processing traffic.
• Off. The WiFi radio is disabled. (If the radio is disabled, see
Radios on page 109.)
Note: The WiFi button is disabled for this product.
Press the WPS button to open a two-minute window for the cable data gateway to
connect with other WPS-enabled devices.
The WPS LED blinks green during this two-minute period. For more information
about using the WPS method to implement WiFi security, see the following sections:
• Join the WiFi Network of the WiFi Cable Data Gateway
• Use the WPS Wizard to Add a Device to the WiFi Network
Hardware Overview
17
WPS button
Nonfunctional button
USB port
on page 26
Control the WiFi
on page 52