NETGEAR C6300BD User Manual page 85

AC1900, N900, and N450 WiFi Cable Data Gateways
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > ADVANCED Home.
The ADVANCED Home screen displays.
6. In the Internet Port pane, click the Connection Status button.
The Connection Status pop-up screen displays.
If this screen does not display, your web browser might be blocking pop-ups. If it is,
change the browser settings to allow pop-ups. The cable data gateway could also block
pop-ups. For information about allowing pop-ups on the cable data gateway, see
Firewall, Web, and NAT ALG Security
The following table describes the fields of the Connection Status pop-up screen.
Field
IP Address
Subnet Mask
Default Gateway
DHCP Server
DNS Server
Lease Obtained
Lease Expires
on page 73.
Description
The IP address that is assigned by the cable service provider to the cable data
gateway.
The subnet mask that is assigned by the cable service provider to the cable data
gateway.
The IP address of the default gateway of the cable service provider that the cable
data gateway communicates with.
The IP address of the Dynamic Host Configuration Protocol (DHCP) server of the
cable service provider that provides translation of network names to IP addresses.
The IP address of the Domain Name Service (DNS) server of the cable service
provider that provides translation of network names to IP addresses.
The day and time that the lease was obtained.
The day and time that the lease expires.
Manage and Monitor Your Network
85
Manage