Configure A Default Dmz Server - NETGEAR C6300BD User Manual

AC1900, N900, and N450 WiFi Cable Data Gateways
Field
Respond to Ping on
Internet Port
MTU Size (in bytes)
Disable SIP ALG
7. If you changed the settings, click the Apply button.
Your settings are saved and the cable data gateway might restart.

Configure a Default DMZ Server

The default DMZ server feature is helpful when you are using some online games and
videoconferencing applications that are incompatible with Network Address Translation
(NAT). The cable data gateway can detect some of these applications and function correctly
with them but other applications might not function well. In some cases, one local computer
can run the application correctly if that computer's IP address is entered as the default DMZ
server.
WARNING:
DMZ servers pose a security risk. A computer that is designated as
the default DMZ server loses firewall protection from exploits on
the Internet. Once compromised, the DMZ server computer attacks
other computers on your network.
The cable data gateway discards incoming traffic from the Internet that is not a response to
one of your local computers or a service that you specially set up for this purpose (see
Up Port Forwarding to Local Computers
can let the cable data gateway forward the traffic to one computer on your network. This
computer is called the default DMZ server.
Manage Internet, WAN, and LAN Settings and Use the WPS Wizard
Description
By default, this check box is selected to enable the cable data gateway to respond
to a ping from the Internet.
Note: When you allow the cable data gateway to respond to a ping from the
Internet, the cable data gateway could be discovered by anyone and in that way
become vulnerable to attacks. For optimum security, clear this check box to
prevent the cable data gateway from responding to a ping from the Internet.
The default MTU setting is 0 (zero), which specifies that the cable data gateway
must use the maximum transmit unit (MTU) value for best throughput. However, if
you use a VPN connection, you might need to adjust the MTU to prevent packet
fragmentation and packet drops.
Note: An incorrect MTU setting can cause Internet communication problems. For
example, you might not be able to access certain websites, frames within websites,
secure login pages, or FTP or POP servers.
The Session Initiation Protocol (SIP) Application Level Gateway (ALG) is enabled
by default to optimize VoIP phone calls that use the SIP. Disabling the SIP ALG
might be useful when you are running certain applications. Select the Disable SIP
ALG check box to disable the SIP ALG.
on page 121). Instead of discarding this traffic, you
45
Set