Table of Contents
Advertisement
Installation
DIMM Module Installation
Figure 5 displays the notch marks and what they should look like on your DIMM
memory module.
DIMMs have 168-pins and two notches that will match with the onboard DIMM
socket. DIMM modules are installed by placing the chip firmly into the socket at a
90 degree angle and pressing straight down (figure 6) until it fits tightly into the
DIMM socket (figure 7).
LEFT KEY ZONE
(UNBUFFERED)
Page 3-6
Figure 5
Figure 6
DIMM Module clip before installation
CENTER KEY ZONE
(3.3 V DRAM)
KP6-LS
Advertisement
Table of Contents
