Table of Contents
Advertisement
KP6-LA
To remove the SIMM module: release the clips on both sides of the SIMM socket
(figure 4).
SIMM Release
Clip
DIMM Module Installation
Figure 5 displays the notch marks and what they should look like on your DIMM
memory module.
DIMMs have 168-pins and two notches that will match with the onboard DIMM
socket. DIMM modules are installed by placing the chip firmly into the socket at a
90 degree angle and pressing straight down (figure 6) until it fits tightly into the
DIMM socket (figure 7).
LEFT KEY ZONE
(UNBUFFERED)
Figure 3
Figure 4
CENTER KEY ZONE
(3.3 V DRAM)
Figure 5
Installation
Page 3-7
Advertisement
Table of Contents
