Hdd Low Level Format; Save & Exit Setup; Exit Without Saving - EPOX KP6-LS User Manual

A dual pentium® ii processor based agp mainboard

Hide thumbs Also See for KP6-LS:

Table of Contents

KP6-LS

BIOS

UNIX operating systems do not support either LBA or LARGE and must utilize the

Standard mode. UNIX can support drives larger than 528MB.

4-10 HDD Low Level Format

Interleave: Select the interleave number of the hard disk drive you wish to perform

a low level format on. You may select from 1 to 8. Check the documentation that

came with the drive for the correct interleave number, or select 0 for automatic

detection.

Auto scan bad track: This allows the utility to scan first then format by each track.

Start: Press<Y>to start low level format.

3-11 Save & Exit Setup

The "SAVE & EXIT SETUP" option will bring you back to the boot up procedure

with all the changes you just recorded in the CMOS RAM.

The "EXIT WITHOUT SAVING" option will bring you back to normal boot up

procedure without saving any data into CMOS RAM.

All old data in the CMOS will not be destroyed.

Page 4-27

Table of Contents