Dish Network Hopper Sling User Manual page 31

913.book Page 21 Tuesday, January 15, 2013 4:57 PM
Controlling a Tuner or Amplifier
Use the following remote-control buttons to control a tuner or amplifier. When the remote
control is set up as described on pages 17 and 21, press the AUX device mode button to
set the remote to AUX mode. The AUX mode button will stay lit for two seconds to show
you've set the remote to AUX mode. Make sure to keep the remote in AUX mode to use
the following buttons.
Switching Between TV and Tuner/Amplifier Volume
Adjustment
When the remote control is set up to operate your TV, the VOLUME and MUTE buttons
will adjust your TV's volume by default. If you prefer the volume and mute functions of the
remote control to adjust the volume of a remote-controllable audio tuner/preamp, other
component or amplifier device instead of the TV, this capability can be set up using AUX
mode of the remote control.
1
Press the MENU button, highlight and select the Settings tile, then Remote Manager.
2
Select the Volume option.
3
Select the device for your remote VOLUME and MUTE buttons to control while in SAT
mode. By default, these buttons control the TV you have programmed in TV mode. You
can choose to use an AUX device, such as an audio component or amplifier, instead. Note
that you must program the audio device in AUX mode for this function to operate correctly.
4
Select the Save option when finished.
AUX Mode
To use the features described in this section, make sure
you are in AUX mode by pressing the AUX Mode button.
Power
Turns the
tuner/amplifier
on and off
Volume & Mute Buttons
Control tuner/amplifier
volume
Satellite Receiver
Controlling Other Components
AUX
Press this
button for
AUX Mode
Select/Arrows
Button
Channel up/down
with the Arrow buttons.
Change tuner/amplifier
inputs with the Select
button
21