Controlling Other Components; Remote Control Modes; Setting Up Using The Remote Manager - Dish Network Hopper Sling User Manual

913.book Page 17 Tuesday, January 15, 2013 4:57 PM
C
ONTROLLING
To use the remote to control other devices (such as a TV, DVD or Blu-ray Disc™ player or
VCR, an audio tuner/preamp or amplifier, or another compatible DISH receiver via IR
only), you must first program the remote to control each of these devices. You can do this
using the following procedures:
•
•
•
•

Remote Control Modes

Use the remote's mode buttons, SAT (Hopper with Sling HD DVR or Joey Receiver), TV
(for a TV), DVD (for a a disc player or VCR), and AUX ("auxiliary," for a second TV, DVD/
BD player or VCR, tuner/preamp or audio amplifier) to set the remote control to the right
mode for each device. To change the mode, firmly press the button for the device you
want the remote to control. The mode button lights for about two seconds to show you
have set the remote to that mode.

Setting Up Using the Remote Manager

To set up your remote to control your devices, use the Remote Manager, as follows:
1
Press MENU, highlight and select the Settings tile, and then Remote Manager.
2
Highlight and select the option for the device mode you want to program:
•
•
O C
THER OMPONENTS
Setting Up Using the Remote Manager on page 17
Limited Mode on page 18
Setting Up by Learning from Another Remote on page 19
Switching Between TV and Tuner/Amplifier Volume Adjustment on page 21.
Select TV Code and follow the on-screen instructions to program the remote in TV
Mode to control your TV. After programming is complete, the TV Power button will also
turn your TV on and off in any device mode. When Limited Mode is enabled, only the
POWER, MUTE and VOLUME buttons will operate your TV.
Select DVD Code and follow the on-screen instructions to program the remote in DVD
Mode to control your DVD or Blu-ray Disc™ player or VCR. When Limited Mode is
Satellite Receiver

Controlling Other Components

17