Specifications - Phonak TX-300V User Manual

tx-300v studio manual_2006_01_20.qxp

Specifications

p
RF Frequency Range
Number of Channels
Frequency Accuracy
Transmitter Stability
RF
Output Power
Antenna
Antenna Connector
Compliance
System Distortion
Audio Input 1
Audio Input 2
Audio
Combined Audio Output (Mix)
Headphone Output
Front Panel
Rear Panel
Controls
Internal Adjustments
Programming
Input 1 and Input 2, Mix VU Meters
Processing
RF Power
Indicators
Power
LCD Display
Test Tone
Power Supply Type
Power Supply Input
Power
Power Supply Output
Power Supply Connector
Compliance
Dimensions W x D x H
Unit Weight
Unit Weight with LA-201 Power Supply 2.0kg (4.4 lbs)
Physical
Shipping Weight
Rack Mounting
Temperature - Operation
Environmental Temperature - Storage
Humidity
4
2/1/2006 12:02 PM
Specification
150-220MHz (Actual frequencies for each unit set by Phonak)
20 Maximum
/- .005% stability 0 to 50C
50 PPM
50mW, 100mW, 300Mw (Actual power for each frequency set by Phonak)
Dipole Antenna (Included with Transmitter)
BNC
FCC Part 15, Industry Canada
<2% total harmonic distortion (THD) at 80% deviation
Rear panel. Female-XLR and phone combo connector, balanced, 0/-55 dBu (line/mic) nominal
input level adjustable
Rear panel. (2) Phono connectors, unbalanced, -10/+10 dBu nominal input level adjustable, +30
dBu maximum, impedance 100k ohms
Rear panel. (2) Phono connectors, unbalanced, 0 dBu nominal output level, +19 dBu maximum,
impedance 10 ohms.
Front panel. (1) 3.5 mm connector, unbalanced, adjustable output level
Power, Test Tone on/off, Channel up/down, Input Level, Mix Level, Contour, Headset Level
Input 1 Level (Line, Mic, Mic-Phantom Power), Input 2 Level (-10/+10 dBu), RF Power (low, mid,
Compression ratio for audio processor
SQ on/off, Processing on/off
8 Green, 2 Red
Indicated by a green LED when on
Indicated on the LCD Display
Red LED illuminates when the unit is powered up
Channel designation, lock status, RF Power Level, programming
Red LED illuminates when test tone enabled
In-line power supply
230VAC, 50 Hz
15VAC, 1000mA
5.0 mm (.02 in) 2.5 mm (OD x .01 in) ID, barrel type
CE
20.3 x 20 x 4.45cm (8.0 x 8.0 x 1.75 in)
1.4kg (3.0 lbs)
2 kg (5.0 lbs)
1 rack unit, optional rack mount not included.
Order Phonak part number 116-1940.
-10 C (14 F) to +40° (104 F)
-20 C (-4 F) to +50° (122 F)
0 to 95% relative humidity, non-condensing
Page 4
high
)