Rf Reception Maximization Strategies - Phonak TX-300V User Manual

tx-300v studio manual_2006_01_20.qxp

RF Reception Maximization Strategies

For proper and dependable operation, Phonak receivers need to receive a
strong and consistent signal from the originating transmitter. The following
strategies should be used to maximize this signal:
1. When designing and installing your system, keep in mind that the location
of the transmitting antenna is critical to maximize broadcast range.
2. Eliminate or minimize obstructions between the transmitter and receiver(s).
3. Minimize the distance between the transmitter and receiver(s).
4. Move the transmitting antenna away from metal or conductive objects.
5. Place the transmitting antenna as high as possible.
6. Orient the transmitting antenna vertically.
7. Position the RF Power switch on the back of the TX-300V to full RF
Power, unless lower power is necessary (see page 7).
CAUTION: When installing antennas, ensure the antenna is clear of power
lines.
10
2/1/2006 12:03 PM Page 10