Rf Reception Maximization Strategies - Phonak TX-300V User Manual

RF Reception Maximization Strategies

For proper and dependable operation, Phonak receivers need to receive a
strong and consistent signal from the originating transmitter. The following
strategies should be used to maximize this signal:
1. When designing and installing your system, keep in mind that the
location of the transmitting antenna is critical to maximize broadcast range.
2. Eliminate or minimize obstructions between the transmitter and
receiver(s).
3. Minimize the distance between the transmitter and receiver(s).
4. Move the transmitting antenna away from metal or conductive objects.
5. Place the transmitting antenna as high as possible.
6. Orient the transmitting antenna vertically.
7. Position the RF Power switch on the back of the TX-300V to full RF
Power, unless lower power is necessary (see page 7).
8. Extend radials to the correct length for selected frequencies (see page 8).
CAUTION: When installing antennas, ensure the antenna is clear of power
lines.
10