Table of Contents
Advertisement
Step 3
Assemble the Console Upright
Parts: Hardware Bag #2
Tools: 17mm Socket Wrench
The console upright tube (C) is pre-assembled with one bolt so that you can simply lift the upright into place by
pivoting upward. Hold the upright in place and install three M10 x 74mm Silver Hex Head Bolts (2) into the
side of the main bracket (D). Install one M10 x 20mm Silver Hex Head Bolt (3) into the front of the bracket.
CAUTION: Do not pinch wires when assembling
the upright.
Step 4
Connect Base Wiring
Parts: None
Connect the two wires (E) at the base of the upright.
12
(3, M10 x 74mm Silver Hex Head Bolts)
(1, M10 x 20mm Silver Hex Head Bolt)
E
Hide quick links:
Advertisement
Table of Contents
