Table of Contents
Advertisement
O
N
S
I
P
O
2
D
P
7
/
O
2
I
R
2
O
N
S
I
P
O
2
D
P
7
/
O
2
I
R
2
2.4. Functional Description
DC 12V: Power input for supplying 12V DC power.
Caution: If ONSIP O2DP7/O2IR24D7W is powered by PoE, do not plug in DC Jack with
active DC power into DC power connector.
MIC/LINE IN
Connect external audio source or microphone.
Line Out
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi-directional
audio mode.
100Base-T
100Mbps Ethernet connector (RJ-45) with PoE standard (802.3af). 2 LEDs on the Ethernet connector
shows the status of ONSIP O2DP7/O2IR24D7W as the followings:
-
Status LED (Dual Color - Red/Green): It will be lit in green or red depending on the status.
Green: Green color indicates that the camera is in normal operation mode. Continuous green
Red: Continuous or blinking red indicates that hardware is in abnormal condition.
Red/Green LED will be lit with red momentarily and it will be lit with green after a while when
power is applied into ONSIP O2DP7/O2IR24D7W
- LINK/LAN LED (Orange)
It will be lit with orange color when network cabling is all right. Blinking orange color indicates that
normal data transmission is under way. Off state indicates that there is trouble in network connection.
'
'
4
D
7
W
O
w
n
e
r
s
M
a
n
4
D
7
W
O
w
n
e
r
s
M
a
n
indicates that data transmission is possible. Blinking green means that someone is
connected to ONSIP O2DP7/O2IR24D7W.
u
a
l
u
a
l
Rev.1.4 (June., 2013)
12
Advertisement
Table of Contents
