Table of Contents
Advertisement
O
O
2
2
i
i
B
B
D
D
2
2
U
U
s
s
e
e
r
r
'
'
s
s
G
G
u
u
i
i
d
d
e
e
2.4. Functional Description
Power : Power input for supplying 12V DC
Caution : If O2iBD2 is powered by PoE, do not plug in DC Jack with active DC power
power connector.
Network (LAN)
100Mbps Ethernet connector (RJ-45) with PoE standard (802.3af). LED on the Ethernet connector shows the status
of O2iBD2 as follows:
- Link LED
It will be lit with orange color when network cabling is all right.
It will be lit with orange color when network cabling is all right. Blinking orange color indicates that normal data
transmission is under way. Off state indicates that there is trouble in network connection
transmission is under way. Off state indicates that there is trouble in network connection
- Status LED (It will be lit in green or red depending on the status
It will be lit in green or red depending on the status)
①
Green : Green color indicates that the camera is
: Green color indicates that the camera is in normal operation mode. Continuous green indicates
that data transmission is possible. Blinking green means that someone is connected to O2iBD2
that data transmission is possible. Blinking green means that someone is connected to
②
Red : Continuous or blinking red indicates that hardware is in abnormal condition.
Red : Continuous or blinking red indicates that hardware is in abnormal condition.
LED will be lit with red momentarily and it will be lit with green after a while when power is
applied into O2iBD2
Micro SD Card slot
Please insert SD memory card when you want to use SD memory card. In case of pulling out SD memory card,
Please insert SD memory card when you want to use SD memory card. In case of pulling out SD memory card,
Please insert SD memory card when you want to use SD memory card. In case of pulling out SD memory card,
please push the SD card.
Connect Camera
Connect Camera Unit.
MIC/Line Input
Connect external audio source or microphone.
Connect external audio source or microphone.
Line Output
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi-directional audio
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi
Connect speakers with built in amplifier. Audio from remote site is output through Line out in bi
mode.
V DC power.
is powered by PoE, do not plug in DC Jack with active DC power into DC
is powered by PoE, do not plug in DC Jack with active DC power
45) with PoE standard (802.3af). LED on the Ethernet connector shows the status
45) with PoE standard (802.3af). LED on the Ethernet connector shows the status
in normal operation mode. Continuous green indicates
d momentarily and it will be lit with green after a while when power is
d momentarily and it will be lit with green after a while when power is
Blinking orange color indicates that normal data
O2iBD2.
Advertisement
Table of Contents
