Table of Contents
Advertisement
AM8010 Precision Thermometer User's Guide
SET Rtp
SET a
SET b
User can adjust Rtp, A4, B4, A, B and C in this section.
Press
key to select and press
previous screen when adjustments are done.
10.
Followings are examples of setting R0 and A4 values.
The adjustment of the other parameters can be done in
similar way.
I. R0 adjustment：
i. Continue from 6.1.8，press
LCD will show：
ii. The value of second line shows the current R0
value. The cursor shows the adjust position. To
modify the value, press
value up or down. Pressing
cursor to next position. After the last digit is
finished, pressing
cursor go the most left position. There is no left
shift key.
iii. After R0 is adjusted，press
LCD should show：
PRT SETTING
R0
100.0100
Menu = Save
Enter = Shift
MENU
key to go back to
key and the
OHM
or
to tune the
will shift the
again will move the
MENU
key and the
21/33
Advertisement
Table of Contents
