AM8010 Precision Thermometer User's Guide
f) Click on the "Start" button, the software should show the
measurement data as follwings:
g) Users can use the "Data Saving" function at the right side
to save the data if needed. The first step is to set the
sampling rate. The above Figure shows the "Data Saving"
and the default sampling rate is 1 sec. if other sampling
rate is needed, users can key in other integer number
between 1 to 65535 seconds. Users can start to record data
by click on "REC" button. To end the data recording, just
click on "END" button to stop. The captured data are
saved to a file with name of"cool_data.txt".
h) To stop data measurement, click on "Stop"。
i) To quit the software, click on "Exit"。
17/33