AM8010 Precision Thermometer User's Guide
SENSOR =
IPRT
PRT
Menu = Exit
7. As illustrated in the above Figure, the first line shows the
current sensor type. If the connected sensor type is
different from the current setting (IPRT for example), the
sensor type needs to be changed. Moving the highlight line
to the correct line by press
key to select. The program will move into parameter
adjustment section as illustrated in step 8.
8. For example,if IPRT is selected,the LCD displays the
followings :
SET R0
SET A
SET B
User can adjust R0, A, B and C in this section. Press
key to select and press
screen when adjustments are done.
9. If PRT is selected ,the LCD display the followings:
IPRT
Enter = Yes
IPRT SETTING
MENU
key to go back to previous
or
, and then press
20/33