Related Manuals for Kogan KAVACSTK18VA
Summary of Contents for Kogan KAVACSTK18VA
- Page 2 Important Safeguards..............................2 Additional Caution for Blower..........................2 Parts....................................3 Installing Charger Base..............................4 Charging the Battery..............................4 Important Note for Charging..........................5 Indication Lights............................... 5 Basic Installation................................5 Vacuum Cleaner............................... 5 Blower..................................6 Operation Instructions..............................6 Accessories..................................7 Crevice set accessories............................7 Hose set accessories...............................
- Page 3 This appliance has been designed for domestic use only. It must only be used in • accordance with these instructions. Kogan.com will not be held responsible for any damage caused by improper or misuse of the appliance. Connect the adaptor only to the voltage stated on the characteristics plate.
- Page 5 This charger base is designed to be wall mounted. Note: care should be taken to ensure that there are no dangerous objects hidden beneath the wall surface (e.g. electrical wires, pipe, etc.) Insert the jack of adaptor (M) into the socket of charger base (L). (Fig.1) 2.
- Page 6 When using your hand vac continuously with built-in battery pack, the batteries in your battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before attempting to recharge. During Operation: Full Battery – Blue (running) Battery Below 20% Capacity –...
- Page 7 This nozzle unit can tilt and rotate in different angles to let you more comfortable and easier to finish the cleaning jobs. This nozzle has 9 different tilting positions. Simply press the tilting release button(B) and pull the nozzle up and down. (Fig.7). Fig.
- Page 8 Choose what feature you will use and fit the appropriate tools into the main unit. 2. To switch on the appliance, press the On/Off button (G) once. To stop, press the On/ Off button once again (Fig.10). 3. If used as power brush vacuum cleaner, when turn on the unit, the roller brush in the power brush will rotate.
- Page 9 This set of accessories includes: Hose (N), Extendible crevice (R), Floor nozzle (S), Car- pet/Fabric brush (T) Insert the hose (with flat adaptor side) into the nozzle. 2. Insert the extendible crevice or floor nozzle into the hose round end. (Fig.12) 3.
- Page 10 position and then turning the outer filter clockwise until click into position. 8. Close the container door by turning clockwise until lock into position. 9. Replace the filter when the airflow of the vacuum cleaner become very weak even when the filter was washed and the dust container was empty.
- Page 11 Belt Lift the left side of the rotating brush up, Unscrew the left hand side, then lift and then remove the belt pulley from the belt. dislodge the brush cover. Remove waste 3. Take out the rotating brush and then 4.