Cleaning & Care .............................................................................................................................................................. 6
In The Box ......................................................................................................................................................................... 7
Safety & Warnings • Please read this manual carefully before use. • Please ensure that the charging cable and charging plug on the cable and unit are kept dry to avoid the risk of electric shock. • Keep out of reach of children. •...
Assembly Instructions The machine is packed as separated parts. Simple assembly is required as follows: Insert the battery pack into main body. 2. Connect the tube to the main body. 3. Connect the floor brush to the tube. Functional Buttons There are 4 functional buttons and one charge connector as follows: Power switch, dust cup release button, bottom release button, battery pack release button and charger connector.
Operation Charging the Battery • Ensure only the original power adapter is used to charge the battery, otherwise it may be damaged. • The display lights will twinkle when charging is needed. The lights will also twinkle while charging. If the lights stop twinkling while on charge, this indicates the battery is full.
Cleaning & Care Method One: Press the bottom release button and dump the collected dust into a rubbish bin. Method two: Press the dust cup release button and take off the dust cup from the main body. Take off the HEPA filter and whirlwind cone, remove the collected dust and clean the parts. Reinstall them as shown after the parts have air dried.
The machine may be too hot after working for long time. Allow the unit to cool down. The power outlet may not be functioning correctly. Try a different outlet. The charger may be damaged. Contact Kogan.com Support. Floor Brush Not Working: The floor brush may be tangled with hair, floss or other rubbish.