Changing The Speedometer Battery - Husqvarna FE 450 EU Owner's Manual

15 ELECTRICAL SYSTEM
15.12

Changing the speedometer battery

Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Pull the speedometer upward out of the holder.
B01786-10
–
Using a coin, turn protection cap
–
Remove speedometer battery
–
Insert the new battery with the label facing outward.
Speedometer battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
B01644-10
–
Position protection cap
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
B01645-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set the speedometer. (
.
1
all the way counterclockwise and remove it.
2
.
3
p. 105)
and turn all the way clockwise using a coin.
2
p. 84)
p. 20)
p. 82)
p. 82)
85